您当前的位置：

首页> 无机商业地坪> 810 奥贝石新型水泥无机磨石

奥贝石，一种新型水泥无机磨石，是广州澳恒公司将传统水磨石的特点与自流平水泥的优点相结合，研发出新型的无机环保地坪胶凝材料，是以彩色面层自流平水泥技术为核心而衍生的一款高端水泥无机地坪材料。该产品应用面广，可适用任何基础地面，如：混凝土地面，瓷砖地面。施工厚度8mm—15mm，与传统水磨石的根本区别可以形成整体大面无缝的视觉效果。奥贝石的施工流程简单快捷，前端摊铺快捷平整，后端无尘研磨环保，可根据场所和客户要求获得哑光和高光效果。设计师可以利用不同颜色的胶凝材料与不同大小粒径和颜色的骨料（如：彩砂，玻璃等）的搭配，构成无限的磨石艺术图案效果，彰显朴实中高贵的品质。

 Aobeishi is a new type of inorganic environmental friendly cementitious material developed by Guangzhou Aoheng company, which combines the characteristics of traditional terrazzo with the advantages of self leveling cement. The product is widely used and can be applied to any foundation ground, such as concrete ground and ceramic tile ground. The construction thickness is 8mm-15mm, which is fundamentally different from the traditional terrazzo to form a seamless visual effect of the whole large surface. The construction process of oberstone is simple and fast, the front-end paving is fast and flat, the back-end is dust-free grinding and environmental protection, and the matte and highlight effect can be obtained according to the site and customer requirements. Designers can use different colors of cementitious materials with different sizes and colors of aggregates (such as: colored sand, glass, etc.) to form an infinite effect of grinding stone art patterns, highlighting the simple and noble quality.

适用范围：

1、商业奥贝石：适用于活动中心，大堂，商场，医院，展厅

2、工业奥贝石：高档停车场，高档工厂，高档仓库

Scope of application:

1. Commercial obershi: applicable to activity center, lobby, shopping mall, hospital, exhibition hall

2. Industrial obershi: high grade parking lot, high grade factory, high grade warehouse

Product features:

1. High construction efficiency: fast paving

2. Quick dry and hard: 24-48 hours after paving

3. High surface hardness: the final surface hardness can reach 7-8

4. High density: anti pollution and wear resistance

5. High glossiness: through polishing similar to stone, the glossiness can reach 100 degrees

6. Good transparency: the product is clear and bright, showing the noble quality of porcelain stone.

7. No shrinkage: the whole large surface is seamless, no shrinkage and cracking, and the color matching pattern

    is  magnificent.

8. Flexible construction thickness: construction thickness can be more than 6mm-15mm according to aggregate size

9. Feel nature, especially natural stone

10. Environment friendly: no dust grinding, no pollution to the construction environment

11. Environmental protection, non-toxic, class a fire protection

施工工艺：

抗裂找平层：1、 基础地面处理  2、 用澳恒胶泥挂网

骨料颜色搭配和图案规划设计：选择胶结料的颜色和合适的骨料。再在找平层上做图案

分仓摊铺材料：布料简单快捷均匀，平整度好

开面研磨抛光：开面研磨，时间要及时，一般在24—48小时。按规定程序精磨处理和抛光

主要施工工具： 摊铺设备 、200KG左右的12磨头磨机或行星磨机 、修边机 、抛光机

Construction process:

1、Anti crack leveling layer

A、 Foundation ground treatment

B、Using Aoheng cement to hang net for crack resistance and leveling

2、Aggregate color matching and pattern planning

A、Selection of binder color and suitable aggregate

B、 Make patterns on the leveling layer

3、Spreading materials in separate warehouses

Simple, fast and even cloth, good flatness

4、Open grinding and polishing

A、Open grinding, time to be timely, generally in 24-48 hours.

B、Finish and polish according to specified procedures

Main construction tools:

1. Spreading equipment

2. Medium grinder

3. Trimming machine

4. Glazing machine

参考用量：厚度10mm，用量约12.5公斤/m²

 Reference dosage: thickness: 10 m m, dosage: about 12.5 kg / m2

包装储存：本产品应保存在干燥处，保存期6个月。25kg/包

Packing and storage: This product should be kept in a dry place for 6 months. 25kg/ package

注意事项：

本产品现场浇铸制作，全程带强力吸尘器干磨，无泥浆水污染。

matters needing attention:

The product is cast in situ, with strong vacuum cleaner for dry grinding, without mud water pollution.

奥贝石，一种新型的水泥无机磨石与传统水磨石的区别如下：

1、奥贝石，施工的全过程采用干磨，无需水磨，解决施工中泥浆污染问题

2、采用流动摊铺，摊铺效率高，平整度好。

3、无收缩，不开裂。

4、可在任何基面上施工，如可在瓷砖面上做奥贝石。

4、骨料粒径大小可任意选择，装饰效果佳

5、硬度高，莫氏硬度可达7左右。

6、后期精磨处理可达到石材质感，良好的光泽度和通透度。

7、A级防火，环保无毒。

奥贝石-新型水泥无机磨石采用高新技术研发出新型特殊的无机环保胶凝材料，再使用新型快捷的施工工艺而最终获得一种类似于天然彩石的艺术地坪产品。本产品可以利用不同颜色的胶凝材料与不同大小粒径和颜色的骨料（如：彩砂，玻璃等），组合成各种多彩的磨石效果。

本文出自广州澳恒建筑装饰材料有限公司，转载请注明出处！

更多澳恒自流平水泥资讯，请咨询：ap300.com，   24小时热线电话：400-9900-998